File NameContentsDownload
-
Adhesives
Lower density | Increased flexibility | Expandable | Debonding
-
Artificial leather
Smooth surface, like nubuck | Rough surface, like suede
-
Automotive
-
- Interior panels for roofs and sides
Low weight | Improved flexibility
-
- Seats and dash-boards (leather)
Nice surface | Good flexibility
-
- Gaskets for automatic gear boxes
Improved sealing effects | Improved compression set | Fills voids between matching surfaces
-
- Body fillers
Low weight Polyester Putty
-
- Underbody coatings
Low weight | Stone chip resistance | Sound damping
-
- Sound-damping coatings
Reduces noise and vibrations | Less coating material needed
-
- Expandable adhesives
Low weight | Improved stiffness | Improved compression set | Fills voids between matching surfaces | Creates inner pressure and better sealing
-
- Floor mats
Anti-slip effect | Matting effect | Elasticity | More rubberlike appearance
-
- Weather strips
Low weight | Cost savings | Uniform closed cell structure | Better sealing properties | Narrow specification along profile compared to CBA | More stable foaming process | Better surface appearance
-
Construction sealants
PU sealant, Silicone sealant, Acrylic sealant | Improved flexibility | Low weight at a low cost
-
Crack filler
Low density | Easy to sand | Creamy butterlike consistency | Sprayability
-
Cultured marble (Wash basins, Bath tubs, Shower trays, counter tops)
Low weight | Better thermal shock resistance | Good processability | Easier after-treatment (cut, sand, trim, drill) | Low resin demand
-
Elastomeric cool roof coatings
Low resin demand - Higher pigment volume concentration (PVC) | Elasticity | Improved vapor permeability | Low thermal conductibility | Improved sola reflectance
-
Extrusion
Low weight | SEBS, SBS, TPU, ABS, PS, PE, PP, TPO, PVC-P
-
Foaming of rubber
Low weight | NBR, EPDM
-
Injection molding
Low weight | SEBS, SBS, EVA, EMA, TPR, TPU, ABS, PS, PE, PP, TPO, PVC-P
-
Leather finishing
Completely touch up damaged areas | Very low shrinkage | Very good buffing properties | Good flexibility | Soft touch feeling
-
Microcellular PU foams in shoe soles
Possible to reach density 250 to 300kg/㎥ | Improved abrasion properties | Less pinholes
-
Model making board (Mock-up)
Low density | Less shrinkage | Prevent stress cracking | Less irritanting for lung and respiratory compared to glass microspheres | Smooth surface
-
Paint and coatings
Cost saving | Low density | Low resin demand - Higher pigment volume concentration (PVC) | Low water absorption | Improved vapor permeability | Easier to apply by roller, brush and airless spray gun | Matting effect | Low thermal conductibility | Elasticity
-
Polyester putty
Low density | Good sandability | Excellent water resistance | High styrene resistance | No pinholes
-
Porous ceramics for gel casting and extrusion
Large total pore volume at low organic content | Rapid and facile burn-out | Higher compressive strength of alumina ceramic | Controlled pore size and size distribution | Controlled density reduction
-
Printing inks
3D effect | Matting | Smooth velvet looks | Embroidery effect | Anti-slip
-
Process aid lamination molding
Improved filling capacity between laminated materials | Improved filling capacity between molded materials (example; coarse mineral fillers, chopped cork and chopped waste rubber)
-
Silicone rubber
Cost saving | Reduced weight | Uniform and closed cell structure | Elasticity
-
Thermoforming
Improved processability of PP and PS foamed sheets
TDS download
